ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP
Your people breathe that air. Make it clean.
Founded 1958
65+ years of industrial filtration engineering
12 Industries Served
From welding to aerospace
to food processing
Part of Coral Group
Backed by a global industrial filtration leader
UL Certified Components
Certified for the US commercial & industrial market
Full-Service Support
Consultation through commissioning, every installation
Our
Every system Coral USA manufactures is built for continuous-duty commercial and industrial use. If you’re looking for a consumer product, this isn’t it.
Articulating fume and dust extraction arms for workstation-level source capture. The right solution when contamination needs to be captured at the point of generation, before it enters the breathing zone or disperses into the facility.
Self-contained extraction units that go where
the work is. From manual welding stations to maintenance operations, portable fume extractors deliver high-efficiency filtration without fixed ductwork. Available with fully automatic self-cleaning filter systems.
High-efficiency pleated cartridge filtration for demanding industrial dust applications. Fully automatic reverse pulse jet cleaning minimizes maintenance downtime and extends filter life. Built for continuous-duty environments where stopping production to change filters isn’t an option.
Proven bag and sleeve filter technology for
high-volume industrial dust and chip collection. Reliable, cost-effective, and configurable for virtually any woodworking, metalworking, or general industrial dust application.
Dry-filter paint booth technology for powder coating, liquid paint, and overspray capture. Built to meet industrial finishing requirements without the complexity and cost of water-wash systems.
The NOIL oil mist collector is a compact, high-efficiency solution designed for oil mist extraction and filtration in machining environments. Engineered to be installed directly on machine tools, NOIL captures
Wet Dust Collector, for grinding and sanding operations. Purify Air from Suspended Solid Particles. The CORAL IDROMIX Wet Dust Collector is a wet filtration system designed to cleanse the air of suspended solid particles.
Integrated work surface and extraction combined. Downdraft tables capture dust, fume, and particulates directly at the work surface, ideal for grinding, sanding, deburring, and small-part finishing operations where a fixed
arm isn’t practical.
Industries
Industrial contaminants don’t follow a single playbook, and neither do we. Coral USA’s filtration systems are engineered to handle the specific dust types, particle sizes, airflow requirements, and compliance standards of your industry, not a generalized solution adapted from somewhere else.
Why US
The industrial filtration market is full of equipment vendors. We’re not one of them. Coral USA brings 65 years of engineering history, global manufacturing scale, and application-specific expertise that most suppliers can’t match. We back every system with full-service support from first call to final commissioning.
Every Coral USA product reflects the precision design heritage of the Coral Group, an Italian industrial filtration company with over six decades of global deployments across 12 industry verticals. Backed by skilled American teams who install, service, and support every system, what reaches your facility is built to last, not just to spec.
There is no universal air filtration solution. Welding fume behaves differently than pharmaceutical powder, which behaves differently than foundry dust. Our systems are engineered around the specific contaminant profile, particle size, concentration, and regulatory requirements of your application. We don’t sell you a one-size-fits-all system and call it done.
Buying an industrial filtration system is not a transaction. It’s an engineering decision. Coral USA provides free consultation, professional on-site facility assessment, custom system design, professional installation, and long-term technical support. We’re the same team from your first call to your final sign-off, and we remain available after the job is done.
OSHA, EPA, NFPA, and industry-specific air quality standards aren’t optional. Non-compliance carries real consequences. Every Coral USA system is designed with regulatory compliance in mind. Whether you’re managing combustible dust thresholds, welding fume exposure limits, or pharmaceutical clean-air standards, our engineering team addresses compliance requirements as a baseline, not an afterthought.
Our Services
Not sure where to start? Neither is anyone who hasn't solved this problem before. Tell us about your facility, your process, your contamination problem, and your compliance requirements. We'll give you an honest assessment of what you need, and what you don't.
Some problems can't be solved over the phone. For complex installations, high-volume facilities, or applications where the stakes are high, our technical team visits your facility. We assess machine layout, contamination sources, airflow patterns, structural constraints, and compliance exposure, at no charge.
We engineer complete industrial air filtration systems. That means specifying the right collector type, sizing ductwork, calculating static pressure, selecting fan performance curves, designing control panel logic, and producing installation-ready drawings. We don't hand you a product recommendation and leave the engineering to you.
A system is only as good as its installation. Our commissioning team handles equipment setup, ductwork integration, system balancing, and full performance verification. We don't consider a project complete until the system is running at specification and your operators know how to use it.
Your team operates the system after we leave. Our training programs ensure operators understand equipment function, filter maintenance procedures, warning indicators, and safe operating protocols. Proper training extends system life and prevents avoidable failures.
Industrial filtration systems are long-term investments. Coral USA provides ongoing technical support, a one-year equipment warranty, telephone assistance, and on-site service visits when needed. We're not a transactional vendor. We're a long-term operational partner.
Filtration Systems
The air inside industrial facilities is not ambient air. It contains dust, fumes, vapors, and particulates generated by the equipment, materials, and processes that run every day. In sufficient concentrations, those contaminants are hazardous, affecting your workers, your equipment, your regulatory standing, and in combustible dust environments, the structure itself.
OSHA’s permissible exposure limits (PELs) establish legal thresholds for dozens of industrial contaminants, from respirable silica and welding fume to wood dust and pharmaceutical powders. The EPA establishes separate standards for ambient air emissions that affect communities beyond the facility fence line. Industry-specific standards, including NFPA 660 (which consolidates the former NFPA 664 for wood processing and NFPA 484 for combustible metals), and others, add a further layer of compliance obligations that are increasingly enforced. Getting this wrong carries legal liability, worker compensation exposure, and the kind of OSHA citations that follow a facility for years.
The right industrial air filtration system doesn’t just keep air clean. It keeps your facility operational, your workforce healthy, your insurance defensible, and your regulators satisfied.
The most common decision industrial buyers face is which filtration technology matches their application. The answer depends on three variables: the contaminant type, the airflow volume required, and the duty cycle of the operation.
Extraction arms are the right choice when contamination needs to be captured at the point of generation: the welding torch, the grinding wheel, the router bit. They’re workstation-level solutions that intercept contaminants before they disperse into the general facility air, dramatically reducing the volume of air that needs to be moved and filtered.
Portable fume extractors serve operations where the work location changes, where fixed ductwork isn’t practical, or where a self-contained unit is operationally simpler. Modern self-cleaning portable extractors with automatic reverse pulse filter regeneration eliminate the manual filter maintenance burden that makes many portable units impractical for continuous-duty use.
Cartridge dust collectors and bag/sleeve dust collectors handle centralized collection from one or multiple machines routed through a ductwork system. Cartridge technology offers higher filtration surface area in a smaller footprint and is particularly well-suited to fine dust and continuous-duty applications. Bag and sleeve systems excel in high-chip-volume environments and offer proven, economical performance for facilities generating mixed coarse and fine material.
Downdraft tables and dry painting booths complete the picture for applications where the work surface itself is the contamination source: grinding, deburring, finishing, and spray application operations where local exhaust at the workstation level is more practical than a centralized system.
Oil mist collectors capture airborne oil and coolant mist from CNC machining and metalworking operations where lubricants become aerosolized, preventing slip hazards, equipment degradation, and poor air quality. Wet dust collectors handle combustible or reactive metal dusts, such as aluminum, magnesium, and titanium, where dry collection presents an ignition risk, neutralizing particles in a water bath. Both technologies fill critical gaps where conventional dry filtration is either ineffective or unsafe.
The most expensive mistake in industrial filtration procurement is undersizing. A dust collector specified for 3,000 CFM installed into a facility that actually needs 6,000 CFM doesn’t run at half-efficiency. It runs at failure. Pressure drop accumulates faster, filters blind prematurely, airflow through branch ducts falls below transport velocity, and the contamination problem that prompted the purchase remains largely unsolved.
Proper system sizing requires calculating the actual CFM demand of every connected machine and process, accounting for simultaneous operation, designing ductwork for correct main duct and branch duct velocities, and selecting a collector that delivers specified performance at actual installed static pressure, not theoretical ideal conditions.
This is not a calculation that should be done with a rule of thumb. It is engineering work. It is work that Coral USA’s technical team does as a standard part of our engagement process, which is why every installation we commission performs to specification.
Tell us about your facility, your contamination problem, and your production constraints. We'll ask the right questions and give you an honest starting point, with no sales pressure.
For complex installations, we visit your facility. Our engineers evaluate contamination sources, airflow requirements, structural constraints, and compliance obligations in person, at no cost.
We design the complete system: equipment specification, ductwork layout, controls, and performance targets. You review and approve the design before anything is ordered.
We install, balance, test, and verify performance. Your operators are trained before we leave. The system runs to spec from day one.
Common Questions About Industrial Air Filtration
Sizing starts with the total CFM demand of every machine and process that will run at the same time, commonly between 350 and 2,000 CFM per connected machine depending on type and size. Ductwork static pressure, transport velocity in the branches and mains, and collector filter efficiency all move the number after that. Undersizing is the most common and most expensive mistake in industrial filtration procurement, which is why our engineers run the calculation as part of the design rather than after the order is placed.
Particle size, and where the capture point has to sit. A dust collector handles the heavier visible fraction from grinding, sanding, cutting and material transfer, usually ducted into a cartridge or sleeve unit. A fume extractor targets sub-micron metal fume and vapor released at an arc or a solder joint, so it captures within inches of the source and finishes on high efficiency media. Most facilities need both, on different stations, and specifying one where the other belongs is the failure we are called in to correct most often.
OSHA enforces permissible exposure limits measured in the breathing zone, so the reading that matters is taken at the operator and not at the collector. Where the dust is combustible, NFPA standards including NFPA 660 govern how it is collected and how the equipment itself is built. EPA rules apply to what leaves the building. Source capture is what makes all three demonstrable, because dilution across a building is hard to evidence and easy to fail.
Cartridges give a large filtering surface in a small footprint and suit fine dry dust at high airflow, with fewer cleaning cycles to run. Sleeves take abrasive, aggressive or high volume material that would blind a cartridge, and they clean and last longer under that load. Most plants end up running both, chosen per source rather than per site, which is why the Coral USA stationary range is modular instead of a fixed package.
In most dry dust applications yes, and that is where the operating cost case is won, because exhausting conditioned air outside means paying to heat or cool the replacement air all year. Coral USA units are rated to return clean air to the workspace where regulations permit, and equipment such as the Polijet DF puts the fan in a soundproofed box so recirculating does not mean adding noise. Combustible or toxic material changes the answer, and that is settled at the on-site inspection rather than assumed.