ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP
Every machine tool that runs coolant or cutting oil turns some of it into an aerosol. High spindle speeds, through-tool coolant and flood cooling on grinders release a mist of emulsion droplets and, with neat oil, a sub-micron oil smoke. Both leave the enclosure whenever the door opens and both stay airborne long enough to reach the operator’s breathing zone, where metalworking fluid mist is linked to occupational asthma and dermatitis.
The property damage is quieter but just as expensive. Oil mist settles on floors, on parts waiting for inspection and inside the electrical cabinets of the very machines that produce it, where it causes the sudden control failures that stop a cell mid-shift. The coolant that escapes as mist is also coolant you buy again and eventually pay to dispose of.
Coral USA collects oil mist at the source. A compact machine-mounted unit sits on the enclosure of an individual lathe, mill or grinder and needs nothing but power. Where a bank of machines runs coolant all day, a centralized unit separates the mist in stages, recovers the oil and returns filtered air to the shop. Both are specified against your machine list, not a generic airflow figure.
Products
Machine-mounted oil mist collector for lathes, CNC, and grinders, with centrifugal separation, multi-stage filtration, and oil recovery.
Centralized oil mist system serving many machines at once, with droplet separator, mesh demister, and coalescing stages for recovery.
Coolant mist is a liquid aerosol, and it behaves nothing like dry dust. It coats dry filter media until airflow collapses, it condenses on cold surfaces into a film that makes floors and ladders slippery, and it carries the bacteria that grow in used emulsion into the air. Operators breathe it at the machine door, and shops that run neat oil at high speed add a sub-micron oil smoke on top of the mist.
Machine tools suffer with the people. Mist drawn into control cabinets and servo drives shortens their life and produces intermittent faults that are expensive to diagnose. A general purpose dust collector specified for chips and dry particles will not solve any of this; oil mist needs mechanical separation first and the right filter stages after it.
For individual machines, the NOIL mounts directly on the enclosure with its own fan, separates the droplets centrifugally, filters the remainder through wire mesh and polyester cartridges, and returns the oil through a drain outlet. It installs in minutes and fits where clearance around the machine is tight.
For a line of machines, the Oil STOP takes the mist through a helical pre-separator, droplet separator, metal mesh pre-filter and pocket filter, with HEPA and activated carbon stages available where the process or the neighbors demand it. A differential pressure gauge tells maintenance when filters need attention instead of leaving them to guess. Send us the machine list, the coolant type and the duty cycle, and we will size the combination against it.
FAQ
No, and the collector is specified differently for each. Emulsified coolant mist is a water based aerosol of comparatively large droplets that a mechanical separator and pocket filter handle well. Neat oil at high spindle speeds produces oil smoke, a sub-micron aerosol and vapor that needs an absolute filter stage. Coral’s standard Oil STOP and NOIL are built for emulsion mist; the Oil STOP RHT variant adds a rigid pocket filter and HEPA H13 stage for whole oil fumes.
Mount it on the machine when each tool runs its own enclosure and duty cycle. The Coral NOIL comes in six sizes from 324 to 1,177 CFM, weighs 62 to 124 pounds, and bolts to a lathe, mill, grinder or gear cutter with quick release couplings and no ductwork. Serve the shop centrally when a bank of machines runs coolant all shift. The Oil STOP handles 471 to 4,414 CFM nominal per unit, with staged separation sized for the concentrated load a busy machining hall produces.
The Oil STOP reaches 95 percent with its G2 metal pre-filter and F9 glass microfiber pocket filter, and 99.95 percent when the optional HEPA H13 or H14 stage is fitted. Ahead of those filters, a centrifugal helical pre-separator patented by Coral throws the larger droplets against a mesh lined duct, so most of the oil never reaches the filter media. The NOIL runs a wire mesh cartridge and a polyester cartridge in series, with a HEPA H13 post-filter available for heavy duty use.
It recovers it. Separated oil in the NOIL drains through a dedicated outlet back to the machine sump or a container, and the Oil STOP conveys it to a collection bin or a siphon drain for continuous recycling. In a shop that buys coolant by the drum, the recovered volume and the reduced disposal cost are usually the numbers that justify the unit.
Yes, both units return filtered air to the room, so you are not exhausting heated or cooled air outdoors. For heavy duty or fume rich environments Coral recommends the HEPA post-filtration stage before recirculating. The Oil STOP runs at 74 to 86 dB depending on size, and a soundproof plenum brings that down to 71 to 80 dB. Where odor is an issue, activated carbon filters can be fitted in the unit or in the plenum.