ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP
Recycling is good for the environment and hard on the people who do it. Scrap metal, electronics, batteries, used oil and other chemicals all contain components that pose a direct hazard to workers, and the handling itself generates dust in quantity. Recycling dust collection differs from a single process line in one important way: the composition of the load changes with whatever arrives at the gate.
That variability is the specification problem. A line that processes cardboard on Monday and mixed electronics on Wednesday presents two different filtration duties, so the system has to be sized for the worst case rather than the average intake.
Coral USA supplies stationary cartridge units for heavy duty airflow and stationary sleeve units where the particles are abrasive and aggressive, both modular so the system can follow a facility that adds a line or changes a stream.
Products
Portable self-cleaning cartridge extractor, shipped with one or two Evolution arms, moving up to 1,345 CFM for welding stations.
Self-cleaning grinding extractor with a stainless wet pre-chamber and spark trap that quenches sparks before the cartridges.
Iperjet base model with four, six, or nine horizontal cartridges, handling welding fume and dust without a central plant.
Iperjet built for heavy duty, stepping up to 9, 12, 18 or 24 horizontal cartridges to move more air across larger applications.
Air purification tower for full-room filtration of welding and cutting fumes where local source capture is not practical.
Centralized sleeve collector handling wood chips and metalworking dust, with row-by-row reverse jet cleaning that never interrupts airflow.
Vertical cartridge collector in galvanized panels, with cartridges matched to your process for continuous medium and fine dust loads.
Downdraft work table with cartridge filters, pulling grinding and sanding dust down through the slotted top away from the operator.
Recycling dust contains micro-particles of plastic and glass, biohazards, toxic substances and respiratory irritants, and organic waste becomes airborne as bioaerosols. The composition is rarely known in advance, which is exactly why capture has to be assumed rather than assessed load by load.
Most of this dust is also highly combustible, particularly the fraction generated from paper, cardboard and textile. A materials recovery facility accumulates fuel faster than almost any other process environment.
Stationary units with cartridge filters cover heavy duty applications where airflow and pollutant volume are both high. Stationary units with sleeve filters take the more abrasive and aggressive particles without clogging.
Both are modular and customizable, which matters in a facility whose input stream is not fixed. Where combustible non-metal dust is present in a controlled area, the NFPA 660 compliant Jetclean DF provides point capture built for class ST1.
FAQ
The composition of the load changes with whatever arrives at the gate. A line running cardboard on Monday and mixed electronics on Wednesday presents two different filtration duties, so the system is sized for the worst case rather than the average intake.
Most of it, particularly the fraction generated from paper, cardboard and textile. A materials recovery facility accumulates fuel faster than almost any other process environment.
Cartridge units cover heavy duty applications where airflow and pollutant volume are both high. Sleeve units take the more abrasive and aggressive particles without clogging, and both are modular so the system can follow a facility that adds a line.
That is what the modularity is for. Stationary units are customizable according to airflow and pollutant, so a change in the stream does not have to mean a change of collector.