ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP
GRINDEX DF JET is the grinding unit. Dry grinding and deburring throw incandescent particles as well as dust, so the inlet carries a specially designed stainless steel wet pre-chamber tray with a spark trap that extinguishes live sparks and reduces the fire risk.
It takes contaminated air from any dry grinding process, from handheld grinders through to automated machine grinders, via pipes or flexible duct. The cartridges remove 99% of the airborne contaminants and clean air returns to the work environment. Back pulse cleaning from the internal compressed air tank runs automatically, and a differential pressure gauge shows remaining cartridge life.
During operation, the Coral GRINDEX DF JET self-cleaning extractor is always operating at peak efficiency thanks to our pneumatic cleaning system. Compressed air stored in an internal tank is used for the automatic back pulse cleaning of the filter cartridges. When the cleaning cycle is initiated, a blast of compressed air is released inside the filter cartridges creating a shock wave that forces the filter cartridges to release the particles from the surface. The collected solids fall by gravity to a lower collection bin.
In the Grindex DF JET, the air extracted through the duct is directed into the settling chamber, where the heaviest dust particles drop into the water tray, which serves as a spark-extinguishing system. The remaining dusty air then passes through the cartridge filter, where fine particles are captured. The filter is automatically cleaned by a compressed-air pulse that removes accumulated dust. The purified air is finally discharged upward through the fan and expelled through the grille at the top of the unit.
The Grindex DF JET range of portable extractors is designed to capture and filter metal grinding dust and welding fumes generated by machining processes in the mechanical industry. Pollutants are collected at the source and conveyed to the filter through rigid or flexible ducting connected to a hood.
Suitable for glowing particles, thanks to the spark extinguishing system. Reduced fire risk due to integrated water tray.
Applications: Welding | Grinding | Deburring | Fine dry dust.
The difference from the Jetclean DF is the pre-separation stage: a stainless steel water tray with a spark trap replaces the dry pre-chamber and rear bin.
Monitoring: differential pressure gauge, standard component.
Automatic compressed-air pulse cleaning is standard on both models: the filter is automatically cleaned by a compressed-air pulse that removes accumulated dust, using compressed air stored in an internal tank. The collected solids fall by gravity to a lower collection bin.
For complete specifications, dimensions and options, see the Grindex DF JET Self-Cleaning Extractor technical sheet.
Watch
| Model | Cartridges (nr) | Cartridge height (in) | Cartridge diameter (in) | Filter media | IFA/BGIA Classification | Fan | Cleaning | Voltage (V) | Frequency (Hz) |
|---|---|---|---|---|---|---|---|---|---|
| Grindex DF2 1.1 JET | 2 | 16 | 13 | Polyester | M-PES | PRM 250 Ø 340 | Pneumatic | 110 | 60 |
| Grindex DF2 2.2 JET | 2 | 16 | 13 | Polyester | M-PES | PRM 250 Ø 355 | Pneumatic | 230/460 | 60 |
| Model | Weight (lbs) |
|---|---|
| Grindex DF2 1.1 JET | 353 |
| Grindex DF2 2.2 JET | 386 |
Our
Dry grinding and deburring dust, from handheld grinders through to automated machine grinders, taken in through pipes or flexible duct.
A specially designed stainless steel wet pre-chamber tray at the inlet carries a spark trap that extinguishes live sparks, removing the fire hazard that incandescent particles otherwise carry into a cartridge collector.
The cartridges remove 99 percent of the airborne contaminants, and clean air returns to the work environment rather than being ducted outside.
The operator initiates back pulse cleaning from the internal compressed air tank. A differential pressure gauge shows how much cartridge life remains.
Two. The DF2 1.1 JET at 1.5 HP and 1,106 CFM on 110 volts, and the DF2 2.2 JET at 3 HP and 1,341 CFM on 230/460 volts.
Fill out the form below and write us about your filtration challenge. We’ll get back to you within 24h.