ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP
Naval construction generates dust and fume in volume, and the geometry of the work is what makes it difficult. Every shipbuilding process involves welding or metalworking, so the fume is continuous, and the job moves from a tank or compartment one week to a large open surface the next.
Shipyard dust collection therefore gets specified for mobility as much as for airflow. Equipment that only works at a fixed bench leaves most of the yard uncovered, and the compartments where exposure is highest are exactly the places a fixed duct run cannot reach.
Coral USA covers that with portable extraction units carrying patented extraction arms for capture at the source wherever the work has moved, stationary cartridge and sleeve systems for the fixed heavy duty stations, and extraction benches for the fabrication work that comes back to a bench.
Products
Heavy-duty self-supporting arm for full-shift source capture of welding smoke, oil fumes, and dust at a single workstation.
Extraction arm with its own fan and cartridge filter built in, so one workstation gets source capture without any ductwork.
Grounded, static-dissipating arm with 316 stainless piping, built for capture points that sit inside classified explosive atmospheres.
Light-duty welding arm, flexible along its full length, for intermittent bench work on cart units or central systems.
Self-contained portable welding fume extractor that runs on standard 120-volt single-phase power, ready for light-duty work anywhere.
Portable self-cleaning cartridge extractor, shipped with one or two Evolution arms, moving up to 1,345 CFM for welding stations.
Self-cleaning grinding extractor with a stainless wet pre-chamber and spark trap that quenches sparks before the cartridges.
Iperjet base model with four, six, or nine horizontal cartridges, handling welding fume and dust without a central plant.
Iperjet built for heavy duty, stepping up to 9, 12, 18 or 24 horizontal cartridges to move more air across larger applications.
Air purification tower for full-room filtration of welding and cutting fumes where local source capture is not practical.
Plug-and-play collector for plasma, laser, and oxygen cutting tables, with a mesh pre-chamber that traps glowing particles before the filters.
Compact bag unit for woodworking chips and dust, using L PES COL270A polyester filter bags.
Modular sleeve unit built for the US market with UL certified motor, switch, and filter, sized for wood dust without a silo.
Centralized sleeve collector handling wood chips and metalworking dust, with row-by-row reverse jet cleaning that never interrupts airflow.
Vertical cartridge collector in galvanized panels, with cartridges matched to your process for continuous medium and fine dust loads.
Naval construction generates dust and fume continuously, because nearly every process involves welding or metalworking. The particles are fine enough to be inhaled deep into the lung, and the confined geometry of tanks and compartments concentrates them.
Painting and coating work adds solvent and overspray to the same environment. The combination is what makes general ventilation insufficient: dilution in an open block hall does nothing for an operator working inside a compartment.
Portable extraction units capture harmful fume, dust and smoke directly at the source in whichever part of the yard the work has moved to. They carry Coral patented extraction arms, which give the flexibility and smooth mobility that repositioning all day requires.
For higher workloads, stationary extraction and collection systems run cartridge or sleeve filters and are modular and customizable according to airflow and pollutant. Extraction benches capture welding fume and dust at the source for the fabrication work that stays at a station.
FAQ
The geometry of the work. The job moves from a tank or compartment one week to a large open surface the next, so equipment that only works at a fixed bench leaves most of the yard uncovered.
With portable extraction units carrying patented extraction arms, positioned at the weld. Dilution across an open block hall does nothing for an operator working inside a compartment, so the capture point has to go in with them.
Effectively, yes. Nearly every shipbuilding process involves welding or metalworking, so extraction is specified for continuous duty rather than for intermittent use.
It adds solvent and overspray to the same environment as the weld fume, and that combination is what makes general ventilation insufficient. Capture is specified per process rather than per space.
Stationary extraction and collection systems running cartridge or sleeve filters, modular and customizable according to airflow and pollutant, plus extraction benches for the fabrication work that stays at a station.