0%

CORAL

ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP

Aircompact Thermal Cutting Dust Collector

Aircompact Thermal Cutting Dust Collector
Horizontal Cartridge Dust Collector for plasma, laser and oxy fuel cut

Aircompact Thermal Cutting Dust Collector

Plug-and-Play dust collector for thermal cut applications

AIRCOMPACT TC is the thermal cutting build, and the pre-filter chamber at the inlet is the reason it exists. A metal-mesh pre-separator collects glowing particles and coarse particulate before they reach the filtering elements, avoiding the fire hazard that plasma, laser and oxygen cutting otherwise carry into a collector.

It needs no installation and is ready with the flip of a switch, supplied with control panel, economizer and fan. Horizontal cartridges clean more effectively and are simpler to service, and the pulse-jet system controlled by a differential pressure switch keeps the filtering surface working through a long cutting run.

  • “Plug & Play” solution, fitted with control panel, economizer and fan
  • Horizontal cartridges for better cleaning and easy maintenance
  • Pneumatic cleaning system controlled by differential pressure switch
  • Pressure regulator
  • Metallic pre-separator to collect glowing particles and coarse particulates
  • High filtering surface, yet compact and easy to move
Welding application

Welding

Grinding application

Grinding

Thermal Cutting application

Thermal Cutting

Cartridges always at their best with Coral automatic reverse pulse cleaning system

A compressed air jet, stored in a special tank, is injected cyclically in the cartridges, creating a shock wave that forces the particles deposited on the external part of the cartridges to fall into the collection bin. The pulse-jet self-cleaning system is electronically controlled and is constantly monitoring the difference in pressure between the clean and dirty side of the filter.

How it Works

Operating principle

The contaminated air enters the lower section of the filter, into the pre-separation chamber, equipped with a metal-mesh pre-filter. Due to the design of the unit, the air velocity reduces abruptly, allowing the larger solids to fall into the collecting hopper.

The dust and fumes then flow through the cartridges, where the finer or lighter solids are collected on the outside. Clean air is discharged.

CORAL AIRCOMPACT TC horizontal cartridge filter is designed to free your workplace from a wide range of air pollutants. It doesn’t need installation and it’s ready to go with a flip of a switch. The cartridge filter inlet consists of a pre-filter chamber, which prevents the incandescent particles from reaching the filtering elements, avoiding fire hazards. CORAL AIRCOMPACT TC is the ideal solution for the extraction of dust and fumes generated by laser, plasma or oxygen cutting, welding and grinding, as well as fine and light dust.

Plug & Play solution, fitted with control panel, economizer and fan; horizontal cartridges for better cleaning and easy maintenance; pneumatic cleaning system controlled by differential pressure switch; pressure regulator; metallic pre-separator to collect glowing particles and coarse particulates; high filtering surface, yet compact and easy to move.

Applications: Welding | Grinding | Thermal Cutting.

Airflow Path

  • Dust inlet in the lower section of the unit
  • Pre-separation chamber with metal-mesh pre-filter (the metallic pre-separator; velocity drops abruptly, incandescent particles and coarse solids are stopped here)
  • Collecting hopper under the chamber receives the larger solids
  • Horizontal filter cartridges; fine and light dust collects on the outside of the cartridges
  • Fan (supplied with the unit, with control panel and economizer)
  • Clean air discharge

Filtration stages

  • Stage 1 – Pre-separation chamber with metal-mesh pre-filter: the air velocity reduces abruptly, the larger solids fall into the collecting hopper and incandescent particles are kept from reaching the filtering elements.
  • Stage 2 – Horizontal cartridges: 2 (TC 1×2) to 12 (TC 3×4), 452 to 2,712 sq ft of filtering surface; the finer or lighter solids are collected on the outside of the cartridges; filtration efficiency 99.9% on 0.5-micron dust particles.

Monitoring: differential pressure switch controlling the pneumatic cleaning system.

Cleaning system

Automatic pulse-jet (pneumatic) cleaning on every model, with valves 2×1” / 3×1” / 4×1” / 6×1” / 8×1” / 9×1” / 12×1” (one valve per cartridge) and 65 psi compressed air feeding.

Working Principle: A compressed air jet, stored in a special tank, is injected cyclically in the cartridges, creating a shock wave that forces the particles deposited on the external part of the cartridges to fall into the collection bin. The pulse-jet self-cleaning system is electronically controlled and is constantly monitoring the difference in pressure between the clean and dirty side of the filter.

Trigger: pneumatic cleaning system controlled by differential pressure switch; a pressure regulator is supplied.

For complete specifications, dimensions and options, see the Aircompact Thermal Cutting Dust Collector technical sheet.

Technical Table

Model Cartridges (nr) Fan power (HP) Efficiency (%) Cleaning Valves (Nr x Ø)
Aircompact TC 1X2 2 5.5 99.9% with 0.5-micron dust particles Pulse-jet 2×1”
Aircompact TC 1X3 3 5.5 99.9% with 0.5-micron dust particles Pulse-jet 3×1”
Aircompact TC 2X2 4 7.5 99.9% with 0.5-micron dust particles Pulse-jet 4×1”
Aircompact TC 2X3 6 10 99.9% with 0.5-micron dust particles Pulse-jet 6×1”
Aircompact TC 2X4 8 15 99.9% with 0.5-micron dust particles Pulse-jet 8×1”
Aircompact TC 3X3 9 15 99.9% with 0.5-micron dust particles Pulse-jet 9×1”
Aircompact TC 3X4 12 20 99.9% with 0.5-micron dust particles Pulse-jet 12×1”
Model A (in) B (in) C (in) D (in) E (in) F (in) G (in) H (in) I (in) L (in) M (in) N (in) O (in) P (in) R (in) S (in) Weight (lbs)
Aircompact TC 1X2 39.92 89.61 63.62 5.91 25.59 25.51 38.11 73.86 2.83 21.26 53.90 30.20 5.91 7.16 21.65 23.03 1356
Aircompact TC 1X3 39.92 108.31 63.62 7.87 25.59 26.50 37.13 92.56 1.85 21.26 53.90 30.20 7.87 9.17 21.65 23.03 1686
Aircompact TC 2X2 51.53 89.61 63.42 9.84 25.59 27.28 36.14 73.86 3.78 35.43 53.90 42.00 9.84 11.06 21.65 23.03 1741
Aircompact TC 2X3 55.47 112.91 63.42 11.81 25.59 27.32 36.10 94.29 3.78 31.89 53.90 45.94 11.81 13.11 21.65 23.03 2085
Aircompact TC 2X4 55.47 137.52 63.42 13.78 25.59 28.38 35.04 121.77 5.75 31.89 53.90 45.94 13.78 15 27.56 28.94 2645
Aircompact TC 3X3 74.25 127.09 63.42 15.75 29.53 27.28 36.14 95.20 3.78 31.89 64.64 53.90 15.75 17.05 27.56 28.94 2645
Aircompact TC 3X4 74.25 145.39 63.42 16.53 29.53 27.28 36.14 111.93 3.78 31.89 64.64 53.90 16.53 17.83 27.56 28.94 3637

Our

Resources

FAQ

Aircompact Thermal Cutting Dust Collector Questions

Plasma, laser and oxygen cutting throw incandescent particles. Carried into a standard collector they reach the filter media still glowing, which is a fire problem rather than a filtration one.

A pre-filter chamber at the inlet holds a metal mesh pre-separator that collects glowing particles and coarse particulate before they reach the filtering elements. That chamber is the reason the TC build exists.

Nominal airflow from 970 to 5,882 CFM and maximum airflow from 1,470 to 8,823 CFM across seven models, with fan power from 5.5 to 20 HP. Rated efficiency is 99.9 percent on 0.5 micron dust particles.

Control panel, economizer and fan. It needs no installation and is ready with the flip of a switch.

A pulse-jet system controlled by a differential pressure switch. Horizontal cartridges clean more effectively under that pulse and are simpler to service when they do come out.

Search products

Fill out the form below and write us about your filtration challenge. We’ll get back to you within 24h.