0%

CORAL

ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP

Jetclean DF Self-Cleaning Extractor

Jetclean DF Self-Cleaning Extractor
High efficiency extraction and filtration of welding fumes, gases, vapors and aerosols.

Jetclean DF Self-Cleaning Extractor

JETCLEAN DF is the portable self-cleaning extractor for welding and light finishing work. It arrives with the patented EVOLUTION NO-SMOKE extraction arm fitted, one or two depending on the station, so the capture point is settled and there is nothing to duct.

Motors of 1, 1.5 or 3 HP deliver up to 1,345 CFM while the unit stays extremely quiet for an occupied bay. A pre-separation chamber drops the heavy fraction before the cartridges, cutting cartridge replacement by 50%, and the compressed air cleaning system extends the life of what remains. A differential pressure gauge monitors filter condition.

  • Equipped with EVOLUTION NO-SMOKE extraction arm
  • Available with one or two suction arms
  • 50% less cartridge replacement thanks to the pre-separation chamber
  • Differential pressure gauge and compressed air cleaning system
  • Horizontal cartridges for easy maintenance
  • High suction capacity, low noise and small footprint
Welding application

Welding

Grinding application

Grinding

Deburring application

Deburring

Dry Dust application

Dry Dust

Powerful, yet quiet plug-and-play solution for numerous applications

The Coral JETCLEAN DF is extremely quiet and features plug-n-go operation, combined with incredible maneuverability and powerful 1, 1.5 or 3 HP motors which provide up to an amazing 1345 CFM airflow. The Coral JETCLEAN DF is a highly efficient and cost-effective self-cleaning extractor for a wide variety of process applications, including welding, sanding, grinding and deburring.

How it Works

Operating principle

The Jetclean DF self-cleaning extractor features a pre-chamber where the majority of fumes are separated and collected in the first bin. Remaining particles are captured by high-efficiency M-class cartridge filters before the air is returned to the environment, with the finest dust collected in the second bin. The filtered air passes through a high-efficiency fan mounted on top of the unit and is expelled through a grille on the upper wall of the plenum, ensuring high extraction capacity and low noise levels. Cartridge cleaning is performed automatically using a compressed-air system.

Horizontal cartridge filter unit, self-cleaning, with integrated centrifugal fan suitable for extraction and filtration of welding fumes, gases, and light vapors. Equipped with a compressed-air cleaning system, it ensures consistent performance and reduced maintenance over time.

Down Flow design concept; low noise; easy maintenance thanks to horizontal cartridge design; Plug & Play; available in NFPA-compliant version.

Airflow path

  • Polluted air inlet (Dynaflex or Evolution No Smoke arm, Ø6.3 in 10 ft; DF 2 – 3 takes two arms)
  • Pre-separation chamber
  • First collection bin (rear bin, coarse dust)
  • Second collection bin (front bin, fine dust)
  • Filter cartridges (horizontal)
  • Fan (top-mounted centrifugal)
  • Filtered air outlet (grille on the upper wall of the plenum)
  • Compressed air tank
  • Start/Stop switch

Air travels from the arm → polluted air inlet → pre-separation chamber (most fume drops into the first bin) → horizontal cartridge filters (fines released by cleaning fall into the second bin) → top-mounted fan → outlet grille in the plenum → room. The fan is downstream of the filters, on the clean side.

Airflow: DF 1 – 1 HP 856 CFM; DF 2 – 1.5 HP 1,109 CFM; DF 2 – 3 HP 1,345 CFM (two arms); DF 1 NFPA 660 1.5 HP 950 CFM. Noise 72–74.5 dB, 65–70 dB with soundproof plenum.

Filtration stages

  • Stage 1 – Pre-separation chamber: the majority of fumes separate and collect in the rear (first) bin.
  • Stage 2 – Horizontal cartridge filter(s), standard M PES polyester: 86.1 sq ft per cartridge, 8 oz/yd², Ø12.8 in x H 15.8 in. IFA-BGIA class M: filters dust with AGW values ≥ 0.1 mg/m³ at > 99.9%. DF 1: 1 cartridge (86.1 sq ft); DF 2: 2 cartridges (172.2 sq ft); DF 1 NFPA 660: 1 anti-static PES cartridge (86.1 sq ft). Fines go to the front (second) bin.
  • Stage 2 optional media: M-PES+PTFE/Membrane polyester with PTFE membrane (8.6 oz/yd²); M-PES+PTFE/Membrane-H with H13 filtration efficiency (8.3 oz/yd²).
  • Stage 3 optional: plenum with absolute H13–H14 HEPA filter, or plenum with activated carbon filter; painted soundproof plenum.

Bin capacities, rear + front: DF 1 2.4 + 4 gal; DF 2 3.2 + 7.4 gal; DF 1 NFPA 660 2.4 + 3.2 gal. Differential pressure gauge is a standard component.

Cleaning system

Automatic compressed-air (pneumatic) cartridge cleaning, standard on every model: DF 1 – 1, DF 2 – 1.5, DF 2 – 3 and DF 1 NFPA 660. The automatic compressed air cleaning tank is a standard component. Dust released from the cartridges collects in the front bin.

The horizontal cartridge arrangement allows for easy access and fast, straightforward maintenance of the filter section.

For complete specifications, dimensions and options, see the Jetclean DF Self-Cleaning Extractor technical sheet.

Watch

See it in action

Technical Table

Model Filter Cartridges (nr) Cartridge height (in) Cartridge diameter (in) Filter media IFA/BGIA Classification Fan Cleaning Voltage (V) Frequency (Hz) Collecting bins Tank volume (gal)
Jetclean DF1 0.75 Cartridges 1 16 13 Polyester M-PES PRM 220 Pneumatic 120 60 2 6,4
Jetclean DF2 1.1 Cartridges 2 16 13 Polyester M-PES PRM 250 Pneumatic 120 60 2 11
Jetclean DF2 2.2 Cartridges 2 16 13 Polyester M-PES PRM 250 Pneumatic 230/460 60 2 11
Model A (in) B (in) C (in) D (in) E (in) F (in) Weight (lbs)
Jetclean DF1 0.75 27 36 46 37 93 60 264
Jetclean DF2 1.1 30 38 54 46 102 65 341
Jetclean DF2 2.2 30 38 56 46 102 65 374

Our

Resources

FAQ

Jetclean DF Self-Cleaning Extractor Questions

A portable cartridge extractor for welding and light finishing work. It arrives with the patented Evolution No-Smoke extraction arm already fitted, so the capture point is settled and there is nothing to duct.

One or two, depending on the model. The DF1 0.75 and the DF2 1.1 take a single arm; the DF2 2.2 is rated for two.

856 CFM at 1 HP, 1,109 CFM at 1.5 HP and 1,345 CFM at 3 HP. Noise pressure stays between 72 and 74.5 dB(A), which is what makes it workable in an occupied bay.

It drops the heavy fraction before the cartridges see it, which cuts cartridge replacement by 50 percent. The compressed air cleaning system then extends the life of what remains.

A differential pressure gauge on the unit reports filter condition continuously, so cartridge changes follow the reading rather than a calendar.

Search products

Fill out the form below and write us about your filtration challenge. We’ll get back to you within 24h.