0%

CORAL

ENGINEERED FOR THE FACILITIES THAT CAN'T AFFORD TO STOP

Clen Portable Wood Dust Collectors

Clen Portable Wood Dust Collectors
Compact, mobile wood dust collector designed for efficient dust and chip extraction in woodworking applications.

Clen Portable Wood Dust Collectors

Portable wood dust collector for flexible woodworking applications.

CLEN is built for wood, not metal. It collects dust and chips from woodworking machines in shops that need the collector to follow the work rather than sit on a fixed duct run, and it rolls between machines as the job changes.

Dust-laden air arrives through ducting or the integrated floor-level inlet. Heavier chips are separated immediately into the plastic collection bag, and the fine wood dust that remains passes through high-efficiency polyester filters before clean air returns to the shop. The single-phase motor suits facilities without three-phase power.

  • Portable wood dust collector with wheels for maximum flexibility
  • Integrated steel centrifugal fan for high airflow performance
  • High-efficiency polyester filtration system for fine wood dust
  • Compact footprint, ideal for small woodworking shops
  • Plug & Play solution, no installation required
  • Fast, easy, low-maintenance operation
Woodworking application

Woodworking

Wood Chips and Dust application

Wood Chips and Dust

Maximum mobility for woodworking dust extraction

CLEN is engineered for dynamic woodworking environments where flexibility matters. Easily move the unit between machines and position dust extraction exactly where needed. This mobile dust collector eliminates the need for fixed installations, reducing downtime and increasing productivity.

Fast setup wood dust collection system

No complex installation. No special requirements. CLEN arrives ready to perform—simply plug it in and start extracting. The single-phase motor makes this wood dust collection system ideal for small workshops and facilities without three-phase power.

How it Works

Operating principle

Designed for woodworking applications, this range of dust collectors extract and filter dust and chips from contaminated air conveyed through ducting directly connected to the machines. The extracted air is drawn by the fan into the unit, where heavier materials are deposited into the collection bag, while the remaining air, containing finer dust, is filtered by high-efficiency polyester filters. The purified air is then returned to the environment.

All models in the range are supplied in a mobile version. Extraction takes place through two inlets: one located under the fan, designed for duct connection, and a floor-level inlet equipped with a gate. All models are fitted with a single-phase motor.

All versions are equipped with L PES COL270 polyester filter bags, transparent plastic collection bags, a steel fan, a single-phase motor and a UL-compliant thermal switch.

Airflow Path

  • Dusty air inlet, duct connection under the fan (Ø6 in on Clen 1, Ø7.1 in on Clen 2)
  • Dusty air inlet, floor-level inlet with gate (adjustable valve)
  • Fan (steel fan, single-phase motor, 3450 rpm; 1 HP on Clen 1, 2 HP on Clen 2)
  • Thermal Start/Stop switch (UL-compliant)
  • Coarse dust collection bag (transparent plastic, Ø17.7 in x H41.3 in, one per unit)
  • Fine dust filter bag (polyester, Ø17.7 in, H47.2 in on Clen 1 and H59 in on Clen 2, one per unit)
  • Clean air outlet

Filtration stages

  • Stage 1 – Gravity separation into the collection bag: heavier materials are deposited into the collection bag on entry. Transparent plastic collection bag Ø17.7 in x H41.3 in, one per unit, a standard component.
  • Stage 2 – Polyester filter bag, standard L PES COL270A, 8 oz/yd². One bag per unit, Ø17.7 in, H47.2 in (Clen 1) or H59 in (Clen 2); filtering surface 20.5 sq ft (Clen 1) and 23.7 sq ft (Clen 2), held on the bag filter holder.
  • Stage 2 optional – FIL cartridges (FIL MOD C and FIL MOD D): L PES 200 polyester cartridge, 5.9 oz/yd²; M PES/AX antistatic polyester cartridge, 5.9 oz/yd².

Cleaning system

The standard unit has no automatic cleaning system: maintenance means emptying the plastic collection bag and periodic filter service, with no compressed air cleaning system to maintain. The optional FIL cartridges are available with a manual cleaning handle (FIL MOD C) or a motor cleaning system (FIL MOD D).

For complete specifications, dimensions and options, see the Clen Portable Wood Dust Collectors technical sheet.

Technical Table

Configuration

Model Bags Bag height (in) Bag diameter (in) Voltage (V) Frequency (Hz) Collection bag volume (gal)
Clen 1 1 47.2 17.7 120 60 29
Clen 2 1 59 17.7 120 60 29

Performance

Model Filter surface area (sq ft) Max. flow rate (CFM) Speed (rpm) Power (HP) Inlets Inlet (in)
Clen 1 20.5 883 3450 1 1 6
Clen 2 23.7 1324 3450 2 1 7.1
Model Height (in) Cart height (in) Width (in) Length (in) Weight (lb)
Clen 1 86.6 51.2 19.7 41.8 83.8
Clen 2 86.6 52.8 19.7 41.8 89.3

Our

Resources

FAQ

Clen Portable Wood Dust Collector Questions

Wood, not metal. They collect dust and chips from woodworking machines in shops that need the collector to follow the work rather than sit on a fixed duct run.

Heavier chips drop straight into the plastic collection bag on entry. The fine wood dust that remains passes through high efficiency polyester filters before clean air returns to the shop.

No. The single phase motor is one of the reasons it suits small workshops and facilities without three phase supply at the machine.

Either through ducting from the machine, or through the integrated floor level inlet when the unit is rolled up to whichever machine is running.

Emptying the plastic collection bag and periodic filter service. There is no compressed air cleaning system to maintain, which is part of why it suits machines that run intermittently through the week.

Search products

Fill out the form below and write us about your filtration challenge. We’ll get back to you within 24h.